3D Measurement Laboratory
In January 2014, we moved to the newly established measurement laboratory in the industrial and commercial area Mainz-Hechtsheim.
Our coordinate measuring machines, with measuring volumes of up to 0.4 m³, are situated in our air conditioned rooms of approx. 130m². A variety of conventional manual measuring instruments provide solutions for (almost) any measurement task.
The measurement laboratory offers the best conditions for services such as 3D measuring services, training and CMM programming.
Measuring equipment monitoring
All our coordinate measuring machines, testing standards and manual measuring instruments are subject to constant review and calibration. This allows us to guarantee the reliability of our results. Security you can count on.
Measuring room climate
The measuring room climate (temperature and rel. humidity) is continuously monitored and recorded. All measurements can therefore be assigned an actual and verified temperature and rel. humidity.
3D coordinate measuring machine Zeiss Contura HTG 7/10/6
- Measuring volume 700mm x 1000mm x 600mm
- Temperature compensated
- Measuring system Zeiss VAST XT
- Measuring and evaluation software U-Soft Solid Ultra, Calypso
- Measurement uncertainty E0, MPE=2,3 +L/30
3D-Scanner eviXscan 3D Heavy Duty Quadro
- Structured-Light Technology
- Scanning range large 370 x 265 x 150 mm
- Scanning range small 150 x 115 x 90 mm
- Light-source type R/G/B LED
- 4x 5Mpix cameras
- Accuracy 0,013 mm
- Point density: 161 pt/mm²
- Export formats stl, ply, obj, asc, bin
- Software eviXscan
3D mulitisensor measuring machine Schneider PMS600
- Measuring volume 600mm x 600mm x 300mm
- Temperature compensated
- High resolution b/w CCD camera
- LED backlight, LED light sectors
- Scanning measurement probe Renishaw SP25
- Measuring and evaluation software Saphir
- Measurement uncertainty E3=(2,8+L/300) µm
3D mulitisensor measuring machine Schneider PMS400
- Measuring volume 400mm x 400mm x 300mm
- High resolution b/w CCD camera
- LED backlight, LED light sectors
- Scanning measurement probe Renishaw SP25
- Measuring and evaluation software Saphir
- Measurement uncertainty E3=(2,8+L/300) µm
Roundness and form tester Zeiss Rondcom 54
- Measuring volume 400mm x 400mm x 300mm
- Measurable inside diameter 300mm / outside diameter 360mm
- Measuring range Z = 500mm
- Measuring and evaluation software ACCTee PRO
- Roundness deviation 0,01+0,000185, µm+µm/mm measuring height
Height measuring instrument Mahr Digimar 817 CLM6
- 600mm measuring range
- Motorised measuring carriage, air bearing system
- MPE (1.8 + L / 600) microns
- Repeatability bores 1 µm, plane 0,5 µm
- Measuring force 1N
Precision diamond wire saw Well 4240
- Absolutely burr-free, smooth cuts without structural change
- Sample size 115mm x 115mm
- Diamond wire cutting width from 100µm
- Contact pressure optimised on sample material (feed rate)
- Adjustable, reproducible wire tension
- Wire tension measurement with dynamometer
- Wire speed measurement 0-2,5 m/s
3D-Printer Ultimaker S5
- Print volume: 33cm x 24cm x 30cm
- Layer resolution: up to 0,02mm – 0,6mm
- Compatible printcores: AA0,25mm / 0,4mm / 0,8mm | BB0,4mm / 0,8mm | CC0,6mm
- Nozzle temperature: 180 – 280 °C
- Nozzle heating time: < 2min
- Heated printing plate: 20 – 240 °C
- Print speed: up to 24mm³/s
- Airmanger for air and temperature control with EPA fine particle filter
- Air circulation rate: 1-50m³/h
- Automatic printing plate leveling
Adress
- akkuraTech GmbH
- Nikolaus-Otto-Straße 8
- 55129 Mainz
Contact
- +49 6131 6192612
- +49 6131 6192613
- [email protected]
akkuraTech GmbH
Adress
- akkuraTech GmbH
- Nikolaus-Otto-Straße 8
- 55129 Mainz
Contact
- +49 6131 6192612
- +49 6131 6192613
- [email protected]